You are here: Home » Products » Tissue&Toilet Paper Making Mahine » Tissue Paper Making Machine » Toilet And Tissue Paper Making Machine And Napkin Finished Paper Products

Toilet And Tissue Paper Making Machine And Napkin Finished Paper Products

Toilet And Tissue Paper Making Machine And Napkin Finished Paper Products

tissue paper making machines for the whole production line

Model:
787
Brand:
FRD
Capacity:
0.8-1 tons per day
Paper grade:
Toilet paper,tissue , facial tissue paper, napkin paper...
Trimmed width:
800mm
Gram weight:
13-25gsm
Drive way:
AC frequency sectional drive


Availability:



Inquire Add to Basket

Product Description

Toilet and Tissue Paper Making Machine and Napkin Finished Paper Products

Product Description of paper making machine

Technical Parameters
1.Output paper :toilet paper roll,kitchen towel and tissue paper roll,
2.Raw material: recycled paper(waste books paper;old office paper; paper off-cut from printing factory and magazine) ; finished wood pulp board
3.Capacity: 1 ton per day;
4. Net paper width:900mm;
5.Mesh width:1100mm
6.Output paper weight: 15-30g/m2;
7. Rail gauge:1400mm;
8. Drive way: adjustable-speed motor

Main Structures of 787mm Toilet/Tissue Paper Machine

1.Cylinder mold section:
1000mm×1100mm x1400mm stainless steel cylinder mold: 1set,
300mm×1100mm× 1400mm couch roll: 1set,coated by rubber,rubber hardness 38±2
2.Dryer cylinder section:
1250mm×1100mm× 1400mm alloy dyer cylinder:1 set,
350mm×1100mm× 1400mm touch roll: 1set,coated by rubber,rubber shore hardness 90±2, equipped with penumatic pressure device,mechanical scraper device.
3.Winding section:
300mm×1100mm× 1400mm reeling drum: 1 set ,reeling stand: 2 sets,winding roll 2 sets.
4. Paper converting section:
787mm rewinding machine with perforating and embossing 1set,
Paper Cutting Machine: 1set, Plastic bag sealing machine: 1set

Major Equipment Table for 787 model Toilet/Tissue Paper Machine

No.	Item	Function
1	Stainless steel cylinder mold	Extract the pulp fiber to felt
2	Alloy Dyer Cylinder	dry the wet paper
3	Exhaust hood of dryer cylinder	To cover the dryers and collect the hot & moist air
4	500mm axial-flow ventilator	To ventilate and pull out the hot & moist air in the exhaust hood
5	1.5m3 High consistency hydra-pulper	break the waste paper into pulp
6	0.9m2 High frequency vibrating screen	To separate and remove the small impurity in the pulp
7	25m3 Bleacher (include drive part)	To whiten the pulp through bleaching
8	250mm single disc pulp refiner	To make the pulp much finer and smoother
9	500mm Impeller	To stir the pulp and make sure the pulp and water mixed well
10	0.3 m2 centrifugal screen	To make the pulp more finer
11	Low concentration sand remover	To remove the sand and impurity in the water and pulp
12	Electrical operation cabinet	To control the machines run or stop
13	roots vacuum pump	To provide the vacuum force for the suction box
14	Pulp pump	To provide the pulp for the needed machine
15	0.5T Boiler	To provide the hot steam for the dryers